Free Shipping on Most Orders over $99.99
6 Month no interest, no payments available
through Bill Me Later and PayPal!

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
Suhr Bella Reverb Hand-Wired 1x12 Combo

$2395.00

image

Bella Reverb 1x12 Combo


SUHR BELLA AMPLIFIERS
Bella is a portable, American voiced, hand-wired, all-tube amplifier, designed to be the ideal grab-n-go amplifier and the ultimate platform for your pedalboard. Bella’s simple and easy to use controls (including Boost and 3-position Bright switch) make it a snap to tailor the amp to your favorite boost, overdrive, fuzz and distortion pedals; while the effects loop is the ideal place for all of your chorus, flange, delay, and reverb pedals.
Bella is powered by a duet of 6L6GC power tubes that deliver either 22 or 44 Watts of Class A/B power and is available in a head or combo format, with or without reverb.


100% HANDWIRED
Each Bella amplifier is meticulously hand wired, assembled, and tested in our Lake Elsinore, CA factory.


SWITCHABLE BOOST & BRIGHT
TWO POSITION BOOST: This 2-position switch varies Bella’s input gain stage via the front panel or the footswitch jack located on the back of the amplifier. Engaging the boost provides +6dB of boost at the first gain stage.

THREE POSITION BRIGHT: The bright switch has three selections available.

  • Bypass
  • In the middle position: Bella introduces a modest amount of brightness that brings out the guitar’s upper frequencies.
  • This position naturally opens up the top-end, allowing all of your guitar’s higher frequencies and chime to shine through.

TRANSPARENT EFFECTS LOOP
Bella is equipped with a full-featured, all-tube series effects loop which performs equally well with pedals and line-level rack gear via the loop’s independent send and return controls. The effects loop was designed to be extremely clean and transparent, making it the ultimate effects platform.

YOUR PEDALS HAVE NEVER SOUNDED SO GOOD
Bella has been specially designed with your pedals in mind and it’s the ultimate, clean, pedal platform. It responds to virtually any pedal in a tone-full way and even the bright switch is friendly with most overdrives and distortions.

VERSATILITY ON THE FLY
The standard Bella has a single button foot switch available for the selectable boost. The Bella Reverb has a two button foot switch available to remotely switch the boost and reverb circuit.

TUBE DRIVEN SPRING REVERB
Available on select models
The optional reverb circuit was painstakingly designed to offer players the ultimate reverb experience without coloring or altering the sound of Bella or your instrument’s natural tone.


AVAILABLE CONFIGURATIONS
The Suhr Bella amplifier is available in the following four configurations:

  • Bella 1x12 Combo - Loaded with Celestion V-Type speaker.
  • Bella Reverb 1x12 Combo - Loaded with Celestion V-Type speaker.
  • Bella Head
  • Bella Reverb Head


SPECIFICATIONS:
Belle Reverb 1x12 Combo

  • Street Price - $2,395
  • SKU - A-BEL-RC
  • Output - Switchable 44/22 Watts RMS
  • Preamp Tubes - 3x 12AX7
  • Power Tubes - 2x 6L6GC
  • Reverb - Tube driven spring reverb
  • Effects Loop - Tube driven, buffered, with independent send and return levels.
  • Speaker - Celestion V-Type (60 Watts)
  • Front Panel - Input, Boost Switch (2-Position), Bright Switch (3-Position), Volume, Treble, Bass, Presence, Reverb, Standby/Wattage Selector Switch, and On/Off Power Switch
  • Back Panel - Mains Input Inlet, Mains Fuse, H.T. Fuse, Speaker Impedance Selector: (2Ω, 4Ω, & 8Ω), 2-External Speaker Outputs, Effects Loop Return Level, Return and Send Jacks, Send Level, In/Out Switch and Boost - Footswitch Jack.
  • Dimensions - 24” (W) x 9.90” (D) x 19.50” (H)
  • Weight - 51lbs
hidden field
Suhr Corso 5-Watt Recording Amplifier

$999.00

image

CORSO

 

HEAVYWEIGHT TONE, FEATHERWEIGHT PACKAGE

 

BEAUTIFUL ARCHITECTURE

"A work of art and beauty ... not just skin deep"

Handcrafted into a beautiful 7-Ply Multi-Wood Headshell. Precision Laser Cut integrated 1-piece front panel and logo. A work of art that can be displayed in any room of your home or studio.

 

UNCOMPROMISED AT ANY VOLUME

Power attenuator allows you to adjust the overall volume without having compromise to your tone.

 

VERSATILITY IN TONE

Perfect amount of control to carve any tone for any recording or practice situation. An amplifier designed to be versatile for any player.

 

RECORDING MADE EASY:

AT HOME & IN THE STUDIO

Line Out brings the entire sound of the amplifier to your recording workspace. Connected to any I/O device the line out makes it easy to capture the nuances and dynamics that Corso has to offer.

 

OVERVIEW:

The Suhr Corso Recording Amplifier is the ideal studio companion.

Corso is an all-tube no compromise variable wattage amplifier (up to 5 watts)

that provides players with all the tone and character of a high powered amplifier in a compact,

portable form factor - perfect for any recording studio application or bedroom practice session.

 

Corso is packed with a number of features which give players incredible flexibility for carving out their ideal sound. With the on-board attenuator, Corso can be easily transformed from the most complex and detailed clean tones, to a wall of harmonically rich overdriven lead tones at any volume.

 

LIKE TO USE PEDALS?

The Corso was designed with a unique low-gain input stage to accommodate a variety of your favorite boost, overdrive and time based pedals.

 

RECORDING MADE EASY - AT HOME & IN THE STUDIO

Equipped with unique a Line Out (post power section), the Corso is ready for the studio. The Corso’s Line Out offers the sound of the entire amplifier, not just the pre-amp section, so you can fully experience all of the Corso’s tone when you plug directly into your digital recording I/O interface for your next session. Should inspiration strike in the middle of the night, just turn the attenuator control fully counterclockwise and play without disturbing the neighbors, or your family.

hidden field
Suhr Eclipse Dual Channel Overdrive/Distortion Pedal

$250.00

image

SUHR ECLIPSE

 

DUAL CHANNEL OVERDRIVE/DISTORTION PEDAL
The Suhr Eclipse is a versatile, no compromise, dualchannel overdrive/distortion that delivers a wealth of warm, organic amp-like tones in an easy to use, compact form factor.
Eclipse’s incredible versatility stems from its powerful and intuitive two channel circuit design. Each channel is completely independent, and features its own Gain, Level and 3-Band passive EQ, similar to a channel switching amplifier. Both channels can be voiced independently to accommodate all of your playing needs.

DUAL CHANNELS
Eclipse features two channels with independent gain, level, and EQ. Simply add a clean amplifier and you instantly have a three channel rig.

INDEPENDENT VERSATILITY
The blue and red channel in the Eclipse sound identical, and the beauty of this lies in the individual passive EQ circuits. You can set one channel for a tight, scooped rhythym sound and the other to a more saturated, midrange focused tone for solos.
Our goal with the passive EQ circuit in the Eclipse is to make it as amp-like and natural as possible. Eclipse is equally comfortable in low gain overdriven tones, as it is in tight high gain aggressive tones.

GLOBAL VOICING CONTROL
We designed the Eclipse to play well with others.
Sometimes you may need to plug into a really dark, or bright amplifier. The unique Voice control allows you to fine tune the top end response of the pedal for the amp you are playing through.


FEATURES:

  • Dual Channel Overdrive/Distortion
  • Independent Gain, Level, and 3-Band passive EQ controls 
  • Global voice control 
  • True Bypass
  • Billet aluminum enclosure
  • Street price $250.00


Eclipse is designed and assembled in the USA.

hidden field
Suhr Classic J Pro Olympic White USA

$3140.00

image

Classic J Pro

 

This is a perfect way to get a "Custom" Jazz bass, without the "Custom" price!! This Classic J bass will surely please professional's to the aspiring bassist. You will not be disappointed!!

 

This bass weighs in at: 9 LBS.

 

...BRING IN THE HEAVY HITTER

 

Overview:
The ALL NEW Classic J Pro features: a 2-piece Alder body, satin finished neck with heavy stainless steel frets, a Rosewood fingerboard and a set of Alnico V Classic J Vintage pickups.

The Suhr Classic J Pro is based on the iconic electric bass designs of the 1960's. This shape has helped define the electric bass guitar for over half a century. The Classic J’s sleek frame, asymmetrical body shape, and slim vintage neck profile make for an instrument that combines vintage style with modern improvements.

From the thundering growl of Rock, to deep warmth of Jazz, to the percussive slap of Funk, the Classic J Pro is always the right choice.


TONE WOODS:

ALDER:
One of the most popular guitar body woods of the 1960's, is grown all over the world. Alder is medium to light in weight with soft tight pores. It has a light tan color and can sometimes exhibit large swirling grain patterns and rings. Alder is favored by blues and rock players for its strong, clear, full-bodied sound, with beefy mids and excellent lows. Alder is used extensively for guitar bodies because of its light weight and its full sound.

MAPLE:
Sourced mostly from the Northern United States and Canada and is commonly used to make necks. Maple has a classic tone, strong in the midrange with a sweet spanky high end.

ROSEWOOD:
Being one of the most popular fingerboard woods for guitars, Indian Rosewood is usually sourced from either India or Bangladesh. It has a thick grain pattern with colors ranging from brown-black, purple, to red-brown. Indian Rosewood is particularly favored by blues and rock players for it’s thick, sweet tone. It has an ideal balance of fat lows, warm mids and a sparkling high end presence.


NECK:
Each Classic J Pro is equipped with our Vintage J neck profile. Rolled edges and a 7.25” fingerboard radius offers a substantial, yet comfortable shape.


NECK FINISH:
The quarter sawn Maple neck is tinted, then finished in satin acrylic urethane, which provides the smooth feel of natural wood as well as protection from moisture.


FRETS:
Every Classic J Pro includes heavy stainless steel frets, which offers silky smooth long-lasting playability. Utilizing the PLEK process on each instrument guarantees the best possible string action, ensures optimized playability and eliminates intonation problems.


ELECTRONICS:
The Classic J Vintage pickup captures the character of a great sounding mid ‘60s single-coil pickup, with just the right amount of output for exceptional warmth, punch, and definition. Whether you play Jazz, R&B, Rock or Country, the Classic J Vintage will bring you all the subtleties and nuances of your unique playing style.


BODY FINISH:
The Classic J Pro uses our nitrocellulose lacquer finish. Our finishing process provides an unparalleled combination of protection, beauty, and tone. Great care is taken to ensure that the thinnest possible layers of finish are applied. This allows the wood to resonate freely while still providing ample protection. Our state of the art equipment, experienced staff, and uncompromising quality control ensure that no instrument leaves our facility until it meets our demanding standards.


HARDWARE:

TUNERS:
The Classic J Pro is equipped with Hipshot tuners, which provide improved tuning and stability.

BRIDGE:
The Gotoh Vintage Jazz bass bridge is solidly anchored for improved connection, improving sustain and tonality. The spiral saddles allow the adjustment/fine-tuning of the instruments string spacing which improve the alignment of the strings to the pickups.

 

Specs:


BODY:
Wood: 2-Piece Alder
Finish: “Thin Skin” Urethane
Color: Olympic White

 

NECK:
Wood: Quartersawn Maple
Fingerboard: Indian Rosewood
Shape: Vintage J
Finish: Tinted Satin
Scale Length: 34"
Fingerboard Radius: 7.25”
Number of Frets: 20
Frets: 20 frets, Heavy Stainless Steel
Nut: Tusq
Nut Width: 1.500"
Inlays: Dot

 

ELECTRONICS:
Bridge Pickup: Classic J Vintage Single-Coil
Neck Pickup: Classic J Vintage Single-Coil
Controls: Volume, Volume, Tone

 

HARDWARE:
Bridge: Gotoh Vintage Jazz
Finish: Chrome
Tuning Machines: Hipshot
Pickguard: 3-Ply Tortoise
Control Knobs: Black Bakelite

 

ACCESSORIES:

Case: Hardshell Case, Black, Classic J

 

SETUP:

String Gauge: .045 - .105

Tuning: E Standard

hidden field
Suhr Riot-Reloaded Distortion Pedal

$200.00

image

SUHR RIOT RELOADED


DISTORTION PEDAL
In 2009, we shipped our very first Riot distortion pedal. Riot became an overnight success, offering players the ability to transform a clean amp into a versatile Classic Rock tone machine.
Riot Reloaded is the result of countless hours of listening, testing, and tweaking our original distortion circuit to create a pedal that is amp-like, aggressive, in your face, and features more gain (30% more than our original Riot).
An excellent companion to the original Riot, Riot Reloaded is a versatile distortion pedal that delivers a broad spectrum of Hi-Gain tones, with an amp-like feel, in a compact stompbox.


30% MORE GAIN
With 30% more gain than the original, Riot Reloaded is the ideal choice for players seeking Hi-Gain Rock, Metal, and drop tuning style tones.


HIGH GAIN AMP-LIKE PERFORMANCE
AMP-LIKE PERFORMANCE
Riot Reloaded responds dynamically to every nuance of your playing, just like the overdrive channel of a modded amplifier. With a simple twist of your volume knob, you can easily morph from mild chunk to full on metal assault.

GAIN TO SPARE
Riot Reloaded offers over 30% more gain than our original Riot. Our engineers balanced the dual gain stages to increase saturation and upper harmonics, resulting in improved midrange articulation, more sustain, and a tighter three-dimensional sound.


YOUR TONE, YOUR CHOICE
TONE SHAPING
The tone control was modified to emphasize upper mid frequencies for a sweeter, more cutting tone, without sounding harsh or fatiguing.

VOICE SWITCH
The versatile three position voicing switch provides Classic, Modern (Full bodied), and Scooped EQ settings.


ADDITIONAL FEATURES

  • True Bypass - Riot is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off.
  • FX Link - The FX Link connector allows the pedal’s switching function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
  • Low Battery Monitor - Riot incorporates a unique battery monitor that alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.


SPECIFICATIONS

  • Street Price - $200.00
  • SKU - 03-RIO-0002
  • Input Impedance - 1M ohm
  • Output Impedance - 600 ohm
  • Power Connector - 9Vdc, center negative, 2.1mm x 5.5mm
  • Operating Voltage - 4V to 18V (nominal 9V)
  • Maximum Voltage - 20Vdc
  • Reverse Battery Protection - Yes
  • Over Voltage Protection - Yes
  • Current Consumption - 8mA
  • Estimated Battery Life - 75 – 100 hours of continuous use
  • Dimensions - 2.5”(W) x 4.5”(D) x 1.25”(H)
  • Weight - 0.75lb
  • FX Link Connector - 1/8” Mono
  • FX Link Max Voltage - 3.3Vdc
  • Shield → Tip - Activate Pedal
  • ROHS Compliant - Yes
  • Agency Approvals - N/A
hidden field
Suhr Jack Rabbit Tremolo Pedal

$200.00

image

Suhr Jack Rabbit


SUHR JACK RABBIT TREMOLO PEDAL
Jack Rabbit is a high quality analog pedal, that delivers a wide variety of tremolo effects – from warm wobble to whacked out. It features simple control over tempo by incorporating both tap, and strum tempo modes. It’s modulation rate spans from 1Hz to 20Hz and utilizes a tempo subdivision switch. The Jack Rabbit Tremolo is housed in a sturdy, aluminum enclosure for maximum protection from abuse. It can be remote controlled via the FX Link jack.
Like all Suhr pedals, the Jack Rabbit Tremolo is True Bypass and can be powered from 9-18Vdc, drawing low current for extended battery life. It is protected from both over voltage and reverse voltage.


TEMPO INPUT
In addition to using the Rate control, Jack Rabbit’s tempo can be set with tap, strum, or via the 1/8″ FX Link jack. See the manual for more details.


CONTROLS

  • Jack Rabbit features an easy to tweak layout which includes Rate, Level, Waveform, and Depth controls.
  • Rate - Controls the speed of the tremolo effect, from 1Hz to 20Hz.
  • Level - Controls the output level of the pedal, from +0dB to +14dB.
  • Depth - Controls the depth of the tremolo effect.
  • Waveform - Selects the modulation waveform which includes Sine, Square, Triangle, Reverse Ramp, and Ramp.


TEMPO CONTROLS
TEMPO SUBDIVISION SWITCH

  • Jack Rabbit features quarter note, eighth note, and quarter note triplet subdivisions.
  • TAP TEMPO
  • In addition to using the Rate control, the tempo can be set by using the built in tap tempo and strum tempo modes. Tap tempo is accessed by pressing and holding Jack Rabbit’s footswitch for approximately one second (please see the manual for details).


ADDITIONAL FEATURES

  • True Bypass - Riot is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off.
  • FX Link - The FX Link connector allows the pedal’s switching and tap tempo function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
  • Low Battery Monitor -  A unique battery monitor circuit alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.


SPECIFICATIONS

  • Street Price - $200
  • SKU - 03-JAC-0001
  • Input Impedance - 1M Ohm
  • Output Impedance - 600 Ohm
  • Power Connector - 9Vdc regulated, center negative, 2.1mm x 5.5mm
  • Operating Voltage - 5V to 18V (nominal 9V)
  • Maximum Voltage - 20Vdc
  • Reverse Battery Protection - Yes
  • Over Voltage Protection - Yes
  • Current Consumption - <>
  • Estimated Battery Life - 25-50 hours of continuous use
  • FX Link Connector - 1/8” Stereo
  • FX Link Max Voltage - 3.3Vdc
  • Shield → Tip - Activate On/Off
  • Shield → Ring - Activate Tap Tempo
  • ROHS Compliant - Yes
  • Dimensions - 2.5”(W) x 4.5”(D) x 1.25”(H)
  • Weight - 0.75lb
hidden field
Suhr Koko Boost Clean/Mid Boost Pedal

$250.00

image

SUHR KOKO BOOST


BOOST PEDAL
Koko Boost is a unique boost pedal that incorporates both a clean transparent boost and a selectable midrange boost. Koko will expand the range of your tube amplifier and Overdrive / Distortion pedals. Koko Boost features an easy to tweak layout which includes Boost and Mid knobs, plus a Freq (Frequency) select switch.


ONE PEDAL, TWO BOOSTS
The two foot-switches allow instant access to each boost mode: clean and mid boost.


CONTROLS

  • Boost - Adjusts the overall output of the boost circuit. The Boost control varies from 0dB (unity gain) to +20dB of gain. Turning this control to higher settings will efficiently push the front-end of your amplifier and create a broad range of natural overdriven tones.
  • Mid - Adjusts the output of the selected Mid frequency (via the Freq switch) that is added to the clean boosted signal.


FREQUENCY SWITCH

  • The three position frequency switch is active when the mid boost is engaged, and allows you to choose between three midrange voicings.
  • Left (Mids) - Full and Smooth, tuned specifically to bring out your guitars natural midrange characteristics.
  • Middle (High Mids) - Clear and articulate, voiced to cut through a mix for solo playing.
  • Right (Low Mids) - Fat and Creamy, excellent for thickening up rhythm and lead tones.


ADVANCED FEATURES

  • Selectable Bypass Mode - Because compressors are commonly found early in the signal chain, we’ve included a high quality, transparent sounding, buffer. Via an internal switch, you can choose to have Koko operate in true bypass, or buffered bypass modes.
  • FX Link - The FX Link connector allows the pedal’s switching function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
  • Low Battery Monitor - Riot incorporates a unique battery monitor that alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.


SPECIFICATIONS

  • Street Price - $250.00
  • SKU - 03-BST-0003
  • Input Impedance - 1M Ohm
  • Output Impedance - 600 Ohm
  • Power Connector - 9Vdc regulated, center negative, 2.1mm x 5.5mm
  • Operating Voltage - 4V to 18V (nominal 9V)
  • Maximum Voltage - 20Vdc
  • Reverse Battery Protection - Yes
  • Over Voltage Protection - Yes
  • Current Consumption - <>
  • Estimated Battery Life - 37 hours of continuous use
  • FX Link Connector - 1/8” Stereo
  • FX Link Max Voltage - 3.3Vdc
  • Shield → Tip - Activate Mid Boost
  • Shield → Ring - Activate Boost
  • ROHS Compliant - Yes
  • Dimensions - 4.875”(W) x 3.875”(D) x 1.375”(H)
  • Weight - 1lb
hidden field
Suhr Rufus Fuzz Pedal

$200.00

image

SUHR RUFUS FUZZ


FUZZ PEDAL
Rufus is a unique fuzz pedal designed to offer a wealth of fuzz tone effects with the dynamics and tactile response of a tube amplifier. Whether your tastes are for the historic tones created at The Fillmore East back in ‘69, or you crave the more aggressive, mid-scoped characteristics of the Grunge-era, Rufus has you covered, and then some.


MX(X) TECHNOLOGY
Switch between Rufus’ two modes (normal and fat) in mid performance by pressing and holding the footswitch.


BEYOND TRADITIONAL
Designed for ultimate versatility, Rufus is equipped with a full featured 3-Band EQ that gives you the ability to easily shape Rufus’ tone without compromising the sound of your guitar or bass rig. Did we just say bass? Yes we did. Rufus is an equal opportunity fuzz pedal that plays well with guitars and basses – no need to worry about losing your bottom-end here.
Unlike traditional fuzz pedals, Rufus’ input was optimized to accept the output of a buffered device such as a tuner or other pedal effects without sacrificing the interaction between your guitar and Rufus. Rufus employs True Bypass switching which totally removes the effect from the signal chain in our dedication to preserve your tone.


ONE PEDAL, TWO MODES
Created to enhance your overall playing experience, we developed Multi-Function Technology mf(x). mf(x) is a proprietary foot switch technology that enables you to seamlessly select between Rufus’ two distinct user modes, Normal and Fat, during a performance just by holding down it’s foot switch. Would you like to default to one mode in particular the next time you turn on Rufus? Not a problem; mf(x) has built in memory that remembers your last mode choice.


ADDITIONAL FEATURES

  • True Bypass - Rufus is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off.
  • FX Link - The FX Link connector allows the pedal’s switching function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
  • Low Battery Monitor - Rufus incorporates a unique battery monitor that alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.


SPECIFICATIONS

  • Street Price - $200.00
  • SKU - 03-RUF-0001
  • Input Impedance - 5K ohm
  • Output Impedance - 10K ohm
  • Power Connector - 9Vdc, center negative, 2.1mm x 5.5mm
  • Operating Voltage - 9Vdc
  • Maximum Voltage - 18Vdc
  • Reverse Battery Protection - Yes
  • Over Voltage Protection - Yes
  • Current Consumption - 9mA
  • Estimated Battery Life - Approximately 60 hours of continuous use
  • Dimensions - 2.5”(W) x 4.5”(D) x 1.25”(H)
  • Weight - 0.75lb
  • FX Link Connector - 1/8” Stereo
  • FX Link Max Voltage - 3.3Vdc
  • Shield → Tip - Activate Green (normal) Mode
  • Shield → Ring - Activate Red (fat) Mode
  • ROHS Compliant - Yes
  • Agency Approvals - N/A
hidden field
Suhr Shiba Drive Overdrive Pedal

$200.00

image

SUHR SHIBA

 

OVER-DRIVE PEDAL
Shiba Drive™ is a smooth sounding overdrive pedal that provides players with a wide variety of fat rhythm and warm lead tones. Shiba Drive is very popular among players seeking an overdrive pedal that can be used in conjunction with both their amplifier’s clean and overdrive channels.


STAND OUT IN THE MIX
Shiba Drive has a pronounced midrange character that ensures your tone cuts through the mix.


CONTROLS

  • Shiba Drive™ features an easy to tweak layout which includes Drive, Level, Tone, and a Smooth switch.
  • Drive - Controls the amount of Drive from the circuit. This will take you from a bluesy crunch to a sustained, compressed overdrive.
  • Level - Controls the output level of the pedal. Shiba provides enough level to push the front end of any tube amp into natural clipping, or adds sustain to an already overdriven amp.
  • Tone - Shapes the the overall tonal response of the pedal – from warm and smooth to bright and cutting.


SMOOTH SWITCH

  • Left - Activates as a mild high-end roll off. Effective for warming up guitars with single-coil pickups.
  • Middle - Voiced to produce a natural, open sounding overdrive.
  • Right - A more pronounced high-end roll off. Excellent for chunky rhythms and violin-like lead tones.

Note: The modes have less effect at lower gain and tone settings.


ADDITIONAL FEATURES

  • True Bypass - Shiba is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off.
  • FX Link - The FX Link connector allows the pedal’s switching function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state.
  • Low Battery Monitor - A unique battery monitor alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.


SPECIFICATIONS

  • Street Price - $200
  • SKU - 03-SHI-0001
  • Output Impedance - 600 ohm
  • Power Connector - 9Vdc, center negative, 2.1mm x 5.5mm
  • Operating Voltage - 4V to 18V (nominal 9V)
  • Maximum Voltage - 20Vdc
  • Reverse Battery Protection - Yes
  • Over Voltage Protection - Yes
  • Current Consumption - 8mA
  • Estimated Battery Life - 75 – 100 hours of continuous use
  • Dimensions - 2.5”(W) x 4.5”(D) x 1.25”(H)
  • Weight - 0.75lb
  • FX Link Connector - 1/8” Mono
  • FX Link Max Voltage - 3.3Vdc
  • Shield → Tip - Activate Pedal
  • ROHS Compliant - Yes
  • Agency Approvals - N/A
hidden field