Free Shipping on Most Orders over $99.99
6 Month no interest, no payments available
through Bill Me Later and PayPal!

Amplifiers

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
GreenHandle Tweed 1x12 - 5E3 Circuit

$1775.00

image

Greenhandle Tweed 1X12


Built here in CT, Greenhandle amplifiers offers top-quality, boutique-class, hand-built '50s tweed amp recreations. The quality of these amplifiers is second to none. If you are looking for a real-deal '50s tweed amp but can't afford the vintage prices or risky reliability, you cannot do better than Greenhandle amplifiers.


Fom the manufacturer's web site:

Greenhandle Music is my best effort to build the highest quality amps using 21st century parts and technology. Starting with old school layouts and designs, I personally build every one of these amps with the finest modern parts and technology I can find. This attention to detail renders an amp with all the original tone as defined by the great amp builders of the past but with superior reliability and lower noise floors. In this new world of small studios and home recording, it is impossible to have an original 50’s Tweed at every location. Also, original early amps have become too valuable to take out on tour to be stolen or beaten to death by the rigors of the road. Greenhandle Amps attempts to puts these tone monsters comfortably back in the hands of the working musician.

This 5E3 type circuit has a number of modifications. I used isolated input and output jacks with modified star grounding scheme. Also, a Mercury Magnetics power transformer was selected with a modified secondary to adjust for modern AC line voltage. This, in conjunction with a NOS rectifier tube, ensures the B+ voltage remains appropriately low for the power and preamp tubes. This Mercury power transformer also provides a center tapped heater circuit that, combined with tightly twisted heater wires, keeps the AC noise to a minimum. All Greenhandle 1x12 Tweed amps come with a Mercury output transformer with 5k and 8k taps so they can run either 6L6 or 6V6 tubes. The cathode capacitors have been reduced to filter out some of the bass and the Paul C mod has been installed. Shielded coaxial is always used to eliminate as much noise as possible in the early preamp section. The early power filter capacitors have been beefed up and screen resistors are installed. Finally, in this instance, wire preamp tube holders were installed rather than shield covers to avoid rattling at high volume. This particular set of modifications works well with humbuckers.


Specs:

  • Mercury Magnetics Transformers
  • Weber 12” 12A125A Alnico Speaker
  • Tung-Sol 6V6GT Power (New Sensor)
  • Electro-Harmonix 12AY7 & 12AX7 Pre Amp
  • Tung-Sol 5Y3GT (NOS) Rectifier
  • Sprague Filter Capacitors 
  • Mallory Decoupling Capacitors 
  • Carbon Comp Resistors 
  • PEC Potentiometers
  • Greenhandle Built Custom Pine Cabinet
hidden field
GreenHandle Tweed 1x8 - 5F1 Circuit

$999.00

image

Greenhandle Tweed 1X8

Our Perspective:
Built here in CT, Greenhandle amplifiers offers top-quality, boutique-class, hand-built '50s tweed amp recreations. The quality of these amplifiers is second to none. If you are looking for a real-deal '50s tweed amp but can't afford the vintage prices or risky reliability, you cannot do better than Greenhandle amplifiers.


From the manufacturer's web site:
Greenhandle Music is my best effort to build the highest quality amps using 21st century parts and technology. Starting with old school layouts and designs, I personally build every one of these amps with the finest modern parts and technology I can find. This attention to detail renders an amp with all the original tone as defined by the great amp builders of the past but with superior reliability and lower noise floors. In this new world of small studios and home recording, it is impossible to have an original 50’s Tweed at every location. Also, original early amps have become too valuable to take out on tour to be stolen or beaten to death by the rigors of the road. Greenhandle Amps attempts to puts these tone monsters comfortably back in the hands of the working musician.

This 5F1 inspired chassis follows the original schematic closely. Greenhandle modifications include isolated input and output jacks with modified star grounding scheme. Also, the output jack was changed to a ¼ phone for easy cabinet or speaker swap. A Mercury Magnetics power transformer was selected with a modified secondary to adjust for modern AC line voltage. This, in conjunction with a NOS rectifier tube, ensures the B+ voltage remains appropriately low for the power and preamp tubes. This Mercury power transformer also provides a center tapped heater circuit that, combined with tightly twisted heater wires, keeps the AC noise to a minimum. Shielded coaxial wire was used as well to eliminate as much noise as possible in the early preamp section. Finally, all Greenhandle amps come with a custom built 1/16” G-10 Garolite Turret Board allowing for secure installation and easy parts replacement.

Specs:

  • Mercury Magnetics Transformers
  • Weber 8” Sig 8S 4 Ohm Alnico Speaker
  • Tung-Sol 6V6GT Power (New Sensor)
  • Electro-Harmonix 12AX7 Pre Amp
  • Tung-Sol 5Y3GT (NOS) Rectifier
  • Sprague Filter Capacitors
  • Mallory Decoupling Capacitors
  • Carbon Comp Resistors
  • Alpha Potentiometer
  • Greenhandle Built Custom Pine Cabinet
hidden field
GreenHandle Tweed 2x10 Super 5F4

$2175.00

image

Greenhandle Tweed 2X10

Our Perspective:
Built here in CT, Greenhandle amplifiers offers top-quality, boutique-class, hand-built '50s tweed amp recreations. The quality of these amplifiers is second to none. If you are looking for a real-deal '50s tweed amp but can't afford the vintage prices or risky reliability, you cannot do better than Greenhandle amplifiers.


From the manufacturer's web site:
Greenhandle Music is my best effort to build the highest quality amps using 21st century parts and technology. Starting with old school layouts and designs, I personally build every one of these amps with the finest modern parts and technology I can find. This attention to detail renders an amp with all the original tone as defined by the great amp builders of the past but with superior reliability and lower noise floors. In this new world of small studios and home recording, it is impossible to have an original 50’s Tweed at every location. Also, original early amps have become too valuable to take out on tour to be stolen or beaten to death by the rigors of the road. Greenhandle Amps attempts to puts these tone monsters comfortably back in the hands of the working musician.

Specs:

  • Mercury Magnetics Transformers
  • 2x10” Weber 10A125 or Celestion Gold (up charge) Alnico Speaker
  • TAD 6L6WGC Power
  • Electro-Harmonix 12AY7 & 12AX7 Pre Amp
  • 5U4GB Rectifier
  • Sprague Filter Capacitors 
  • Mallory Decoupling Capacitors 
  • Carbon Comp Resistors 
  • CTS Potentiometers
  • Greenhandle Built Custom Pine Cabinet
hidden field
Greenhandle Tweed 4x10 - 5F6-A Circuit

$2350.00

image

This amp is available for custom build, please contact George @ 860 496-9362


Tweed 4X10

Built here in CT, Greenhandle amplifiers offers top-quality, boutique-class, hand-built '50s tweed amp recreations. The quality of these amplifiers is second to none. If you are looking for a real-deal '50s tweed amp but can't afford the vintage prices or risky reliability, you cannot do better than Greenhandle amplifiers.


Fom the manufacturer's web site:
Greenhandle Music is my best effort to build the highest quality amps using 21st century parts and technology. Starting with old school layouts and designs, I personally build every one of these amps with the finest modern parts and technology I can find. This attention to detail renders an amp with all the original tone as defined by the great amp builders of the past but with superior reliability and lower noise floors. In this new world of small studios and home recording, it is impossible to have an original 50’s Tweed at every location. Also, original early amps have become too valuable to take out on tour to be stolen or beaten to death by the rigors of the road. Greenhandle Amps attempts to puts these tone monsters comfortably back in the hands of the working musician.


Specs:

  • Tweed 4x10 Combo
  • Mercury Magnetics Transformers
  • 4 Weber 10” 10A125 30 watt Alnico Speaker
  • Tung-Sol 5881 Power (New Sensor)
  • Electro-Harmonix 12AY7 & 12AX7 Pre Amp
  • TAD GZ34/5AR4 Rectifier
  • Sprague Filter Capacitors 
  • Mallory Decoupling Capacitors 
  • Carbon Comp Resistors 
  • PEC Potentiometers
  • Greenhandle Built Custom Pine Cabinet
hidden field
Mesa/Boogie 2x12 Recto Horizontal Cabinet

$799.00

image

Mesa/Boogie 2x12 Recto Horizontal Cab

Full Details:
2x12 Recto® Horizontal Cabinet
This cabinet is LEGENDARY! The original Rectifier® 2x12 Horizontal Cabinet was designed by matching the dimensions of the bottom two speakers in a Standard Oversized Rectifier 4x12. While simple in it’s design concept, the resulting sealed enclosure delivers HUGE punch, projection and authority from it’s relatively small size. In addition to world-class low end response, it’s midrange punch and bite, coupled with the classic warmth and cut of Celestion Vintage 30s, makes this cabinet an excellent choice for all styles despite it’s reputation in high gain rock, alternative and metal styles. Anytime you want to bring a 4x12 but can’t, the 2x12 Recto® sounds big enough to make you wonder if you DO have a 4x12 behind you!
You simply won’t find a better cabinet. ALL MESA® ENCLOSURES are made using the finest Void-free, Marine Grade Baltic Birch. Super strong rabbet corners are glued and nailed. Speaker baffles are fitted with superior dado joint construction and braced. Grilles are wrapped around a separate grille board, not the baffle board. Grille material is made of strong twisted jute dipped in a special coating that filters top end for a sweeter response.

The Home of Tone®
Cabinetry plays a major and sometimes overlooked role in achieving the ultimate sound you are searching for. While your amp offers controls for fine-tuning your sound, no amp will sounds its best without an equally good (or better) sounding cabinet. That’s why it’s so important to choose a cabinet that will not only suit your playing style, but also enhance it and the other equipment you're using.
The Rectifier® Cabinet Series is designed and constructed using the best materials, speakers and craftsmanship you can own. Our most popular cabinet line also offers the widest array of configurations, sizes and styling, assuring that you can find a Rectifier Cabinet to fulfill the needs of any tone, feel or footprint you’re looking for.


Features and Specifications:

  • Style/Type: Closed Back (sealed)
  • Speaker(s) & Mounting Position: Celestion Vintage 30s / Rear Mounted
  • Wattage: 120 Watts
  • Mono or Mono + Stereo Input: Mono + Stereo Optional (sold separately)
  • Cabinet Impedance: 8 Ohm
  • Transport Assistance: Included - Track-Loc™ Removable Casters
  • Additional Features: Paralleled Mono Output


Weight And Dimensions:

  • Weight: 61 Lbs.
  • Height: 17 1/2"
  • Width: 30 1/8"
  • Depth: 14 1/4"


Accessories:

  • Slip Cover: Included - Fitted Slip Cover
hidden field
Mesa/Boogie Cab Clone Cabinet Simulator 8 Ohm

$299.00

image

Mesa/Boogie Cab Clone

CABCLONE™ - Cabinet Simulator with Built-In Amp Load & Headphone Output

The CABCLONE™ is a passive Cabinet Simulator/Speaker+Mic alternative for use with Guitar amplifiers that allows direct interface of your guitar amp’s Speaker Output with a mixing console, microphone preamp or even direct to your converters (recorder). It’s also a Compensated Headphone Driver that delivers a great sounding, great feeling Headphone-friendly version of your amp’s Tone that’s perfect for late night practice sessions or anytime you want to play without others listening.

PRODUCT SPECIFICATIONS:

CABCLONE™ - Cabinet Simulator with Internal Amp Load & Headphone Output

  • Designed and Handcrafted in Petaluma, California, USA
  • Passive Design – No Power Supply Required
  • Built-In Internal Amp Load FOR AMPS RATED 150 WATTS OR LESS (auto-activates when no cable is connected to “Thru” Output)
  • 1/4" “Input” Jack (receives signal from amp's speaker output)
  • 1/4" “Thru” Output Jack (defeats to Internal Load when no cable is connected)
  • 3-Position Cabinet Voicing Switch - Open-Back, Closed-Back & Vintage Closed-Back Cabinet Simulations
  • Variable -30 to +4db DI Output Level Control with presets for Dynamic Mic Level (-30db), Instrument Level (-10db) & Line Level (+4db)
  • Balanced XLR Direct Output (controlled by the Variable DI Output Level Control)
  • Independent 1/4" +4 Line Level “Slave” Output Jack (exact signal from amp's speaker output, non-simulated)
  • Compensated Headphone Output Jack (defeats balanced outputs when used)
  • Phase Switch – Normal (In) or Reverse (180°)
  • Ground Lift Switch
  • Removable Tilt-Back Stand (for use over an amp handle)


FORMATS:

  • 4 Ohm – For amps rated 150 watts or less
  • 8 Ohm (standard) – For amps rated 150 watts or less
  • 16 Ohm – For amps rated 150 watts or less


WEIGHTS & DIMENSIONS

  • Dimensions: (W/D/H): 6.7" x 6.40" x 2.30" without tilt-back stand (3.30” with tilt back stand) 170.18mm x 162.56mm x 58.42mm without tilt-back stand (83.82” with tilt back stand)
  • Weight: 2.4lbs (1.09Kg) WITH Tilt-Back Stand
/ 2.3lbs (1.04Kg) WITHOUT Tilt-Back Stand 


hidden field
Mesa/Boogie Mark Five: 25 Head

$1599.00

image

Mesa Boogie Mark Five: 25

Mini Reinvented & Amp; Redefined!

Meet the Mark Five: 25™  Packing the legendary preamp TONE, stylistic versatility and  aggressiveness of the MARK IIC+™, MARK IV™ and MARK V™, the new  MARK FIVE: 25™ provides a “greatest hits” collection of our renowned  Mark Series preamp circuits served up with a bouncy, brash new attitude all  its own and packaged in a truly unbelievably small size!

The Mark Five: 25 combines the power of our most famous Mark Series  preamps with our exclusive Dyna-Watt™ 2xEL84 power section to create a  new Mark Series amp of unprecedented portability, clip-ability and high- speed, tactile expressiveness.  The result is a new bench-MARK, every bit  worthy of its ancestor’s storied heritage. 

Scale-down in size, not performance!!! Check out the Mark Five: 25 and  prepare to be blown away as to how MASSIVE “mini” can be!!! 

Mark Five: 25™ Features:

  • Designed AND Handcrafted in Petaluma, California USA  
  • All-Tube Design: 2xEL-84 Power Tubes & 6x12AX7 Preamp Tubes  
  • Fixed Bias for consistent, maintenance free performance  
  • Patented Multi-Watt™ Channel Assignable Power Amp featuring Mesa’s proprietary Dyna-Watt™ technology providing two power levels with different wiring configurations via independent 10/25  Watt Power Switches

Choose from:

  • 10-Watt Mode utilizes 2 tubes operating in Class A/B Triode for lush harmonics and liquid feel at lower volumes    
  • 25-Watt Mode utilizes 2 tubes operating in Mesa’s exclusive Dyna-Watt™ Class A/B Pentode for maximum power, punch and clarity  

2 Fully Independent Channels with 6 Style Modes:  

  • Channel 1 Features: Clean, Fat or Crunch Modes with Multi-Watt™ Power Switch (10/25 Watts) - Independent Gain,  Treble, Mid/Boost*, Bass, Presence, Reverb (rear panel) & Master Controls - *Powerful Mid/Boost Control doubles as a  standard Midrange Tone Control (from 1 to 5) AND a Variable Gain Boost Control (from 5 to 10) providing precise levels  of sweet harmonic overdrive, from subtle to blistering.
  • Channel 2 Features: Legendary Mark IIC+, Mark IV and Xtreme Modes with Multi-Watt™ Power Switch (10/25 Watts) -  Independent Gain, Treble, Middle, Bass, Presence, Reverb (rear panel) & Master Controls  • Selectable 5-Band Graphic EQ – Footswitchable, Channel Assignable or Bypassable   • All-Tube, Spring Reverb with Independent Channel Control (rear panel)   • Fully Buffered, Tube FX Loop   • Built-In CabClone™ Cabinet Simulator with Internal Amp Load and Headphone     Output – Featuring Closed-Back and Open-Back Voicings, Speaker On/Off     and Ground Lift Switches   • All Aluminum Chassis  • 2 Button Footswitch (Channel 1/2 & EQ)   • Slip Cover   

Format:  

  • Head  

Standard Finish:  

  • Black Taurus Vinyl / Black Jute Grille

Dimensions:  

  • 8 H x 14 W x 8.75D  

Weight:  

  • 16.5 lbs
hidden field