Free Shipping on Most Orders over $99.99
6 Month no interest, no payments available
through Bill Me Later and PayPal!

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
DBX 131S Single 31-Band Graphic Equalizer

$159.99 $229.99

image

DBX 131S


Exceptional sound and rugged reliability

When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 131s includes a single 31-band channel of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.


Features:

  • Single 31-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12dB
  • 12dB per octave, 3dB down @ 50Hz low-cut filter
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inputs and Outputs
  • Frequency Response of <10hz to="">50kHz
  • Dynamic range of greater than 108dB


Specs:

  • Input Connectors 1/4" TRS, female XLR (pin 2 hot)
  • Input Type Electronically balanced/unbalanced, RF filtered
  • Input Impedance Balanced 40k ohm, unbalanced 20k ohm
  • Max Input >+21dBu balanced or unbalanced
  • CMRR >40dB, typically >55dB at 1kHz
  • Output Connectors 1/4" TRS, male XLR (pin 2 hot)
  • Output Type Impedance-balanced/unbalanced, RF filtered
  • Output Impedance Balanced 100 ohm, unbalanced 50 ohm
  • Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth 20Hz to 20kHz, +0.5/-1dB
  • Frequency Response <10hz to="">50kHz, +0.5/-3dB
  • Dynamic Range Typically >112dB
  • Signal to Noise Ratio Typically >95dB
  • THD+Noise <>
  • Interchannel Crosstalk <-90db, 20hz="" to="">
  • Bypass Switch Bypasses the graphic equalizer section in the signal path
  • Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
  • Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
  • Operating Voltage 100-240VAC 50/60Hz
  • Power Consumption 15W
  • Power Connector IEC receptacle
  • Unit Weight 4.8 lbs.(2.2 kg)
  • Shipping Weight 6.2 lbs.(2.8kg)
  • Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W
hidden field
DBX 266XS Compressor / Gate

$149.99 $209.99

image

DBX 266XS


Bring a more professional sound to your mix

Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.

dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.


Features:

  • Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
  • New gate timing algorithms ensure the smoothest release characteristics
  • Program-adaptive expander/gates
  • Great sounding dynamics control for any type of program material
  • Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
  • Stereo or dual-mono operation
  • Balanced inputs and outputs on 1/4" TRS and XLR connectors
  • Side Chain insert
  • Classic dbx® "Auto" mode


Specs:

  • Input Connectors 1/4" TRS and female XLR (pin 2 hot)
  • Input Type Electronically balanced/unbalanced, RF filtered
  • Input Impedance 40kΩ balanced/unbalanced
  • Max Input >+22dBu Balanced or Unbalanced
  • Output Connectors 1/4" TRS, female XLR (pin 2 hot)
  • Output Type Impedance-balanced/unbalanced, RF filtered
  • Output Impedance +4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced
  • Max Output >+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω)
  • Sidechain 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
  • Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)
  • Sidechain Max Input Level Tip = >+22dBu (Input)
  • Sidechain Max Output Level Ring = >+20dBu (Output)
  • Compressor Threshold Range -40dBu to +20dBu
  • Compressor Threshold Characteristic Selectable OverEasy® or hard knee
  • Compressor Ratio 1:1 to Infinity:1
  • Compressor Attack Time Scalable Program-Dependent AutoDynamic™
  • Compressor Release Time Scalable Program-Dependent AutoDynamic™
  • Expander/Gate Threshold Range -60dBu to +15dBu
  • Expander/Gate Ratio 1:1 to 4:1
  • Expander/Gate Attack Time <>
  • Expander/Gate Release Time Program-dependent
  • Bandwidth 0.35Hz - 90kHz, +0/-3dB
  • Frequency Response Flat: 20Hz-20kHz, +0, -0.5dB
  • Noise <-93dbu unweighted="" (22khz="" measurement="">
  • THD+Noise Typically <0.2%; any="" amount="" of="" compression="">
  • IMD Typically <0.2%>
  • Dynamic Range >114 dB, unweighted
  • Interchannel Crosstalk <-95db, 20hz="" to="">
  • CMRR >40dB, typically >55dB at 1kHz
  • Stereo Coupling True RMS Power Summing™
  • Power Consumption 15 Watts Maximum
  • Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
  • Operating Temperature 0°C to 45°C (32°F to 113°F)
  • Dimensions 1.75" x 5.75" x 19" (4.45 cm x 14.6 cm x 48.26 cm )
  • Unit Weight 4.84 lbs (2.19 kg)
  • Shipping Weight 6.6 lbs (2.99 kg)
  • Reference 0dBu = 0.775Vrms
hidden field
DBX 231S Dual Channel 31-Band Equalizer

$199.99 $279.99

image

DBX 231S


Exceptional sound and rugged reliability

When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 231s includes two 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.


Features:

  • Dual 31-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Frequency Response of <10hz to="">50kHz
  • Dynamic range of greater than 108dB


Specs:

  • Input Connectors 1/4" TRS, female XLR (pin 2 hot)
  • Input Type Electronically balanced/unbalanced, RF filtered
  • Input Impedance Balanced 40k ohm, unbalanced 20k ohm
  • Max Input >+21dBu balanced or unbalanced
  • CMRR >40dB, typically >55dB at 1kHz
  • Output Connectors 1/4" TRS, male XLR (pin 2 hot)
  • Output Type Impedance-balanced/unbalanced, RF filtered
  • Output Impedance Balanced 100 ohm, unbalanced 50 ohm
  • Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth 20Hz to 20kHz, +0.5/-1dB
  • Frequency Response <10hz to="">50kHz, +0.5/-3dB
  • Dynamic Range Typically >112dB
  • Signal to Noise Ratio Typically >95dB
  • THD+Noise <>
  • Interchannel Crosstalk <-90db, 20hz="" to="">
  • Bypass Switch Bypasses the graphic equalizer section in the signal path
  • Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
  • Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
  • Operating Voltage 100-240VAC 50/60Hz
  • Power Consumption 15W
  • Power Connector IEC receptacle
  • Unit Weight 6.2 lbs.(2.81 kg)
  • Shipping Weight 7.9 lbs.(3.58kg)
  • Dimensions 3.5" (8.9cm) H x 6"(15.24cm) D x 19" (48.26cm) W
hidden field
DBX 166XS Compressor / Limiter / Gate

$239.99 $339.99

image

DBX 166XS


Bring a more professional sound to your mix

Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.

dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.


Features:

  • Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
  • New gate timing algorithms ensure the smoothest release characteristics
  • Program-adaptive expander/gates
  • Great sounding dynamics control for any type of program material
  • Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
  • Stereo or dual-mono operation
  • Balanced inputs and outputs on 1/4" TRS and XLR connectors
  • Side Chain insert
  • Classic dbx® "Auto" mode


Specs:

  • Input Connectors 1/4" TRS, female XLR (pin 2 hot)
  • Input Impedance >50kΩ balanced, >25kΩ unbalanced
  • Max Input >+24dBu, Balanced or Unbalanced
  • Input Type Electronically balanced/unbalanced, RF filtered
  • Sidechain 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
  • Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)
  • Sidechain Max Input Level >+20dBu (tip/input); >+20dBu (ring/output)
  • Output Connectors 1/4" TRS, female XLR (pin 2 hot)
  • Output Impedance 120Ω balanced, >60Ω unbalanced
  • Max Output +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω)
  • Frequency Response 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
  • Noise <-90dbu, 22hz="" to="" 22khz,="" no="" weighting,="" unity="">
  • THD+Noise Typically <0.04%; any="" amount="" of="" compression="" up="" to="">
  • IMD Typically <0.08% smpte="" @="" +10dbu="" (15db="" gain="">
  • Compressor Threshold Range -40dBu to +20dBu
  • Compressor Threshold Characteristic Selectable OverEasy® or hard knee
  • Compressor Ratio Variable; 1:1 to Infinity:1; 60dB Maximum Compression
  • Compressor Attack Time Variable program-dependent; 3ms to 340ms for 15dB gain reduction
  • Compressor Release Time Variable program-dependent; 200dB/Sec to 3dB/Sec
  • Expander/Gate Threshold Range OFF to +15dBu
  • Expander/Gate Ratio 10:1
  • Expander/Gate Max Depth >60dB
  • Expander/Gate Attack Time <500µs (from="" maximum="">
  • Expander/Gate Release Time Adjustable, 30ms to 3sec (to 30dB attenuation)
  • Limiter Threshold Range 0dBu to +20dBu
  • CMRR >40dB, typically >55dB at 1kHz
  • Interchannel Crosstalk <-80db, 20hz="" to="">
  • Dynamic Range >115 dB, unweighted
  • Stereo Coupling True RMS Power Summing™
  • Power Consumption 15 Watts Maximum
  • Operating Temperature 0°C to 45°C (32°F to 113°F)
  • Dimensions 1.75" x 19" x 6.75" (4.45 cm x 48.2 cm x 17.15 cm)
  • Unit Weight 5.05 lb (2.29 kg)
  • Shipping Weight 7.20 lb (3.27 kg)
  • Reference 0dBu = 0.775Vrms
  • Operating Voltage 100 VAC 50/60Hz; 120VAC 60Hz; 230 VAC 50/60 Hz
hidden field